Align Trex600 NSP

Spec

• CCPM SERVO Jr 8717
• TAIL SERVO Futaba BLS251
• Throttle SERVO Fuatba S9254
• GYRO Futaba 611
• Engine Align 50
• Muffler Align 50
• Regulator : Align 2 in 1 Bec
• Governor: Align RCE-G600
• Rx : Spektrum AR7000
• Main Blade : Align 600D
• Tail Blade : Align CF
• Paddle : Align CF
• Collective Pitch + / - 12 degree
• Cyclic Pitch 8 degree

Gyro Settings

1. gyro direction NOR
2. mode to (AVC)
3. flight mode to 3C
4. limit A, B 120%
5. Gain to 35%
6. start delay both A and B to 15%
7. stop delay both A and B to 15%

Engine Settings

• OS8 glow plug
• CP 30% fuel
• Fuel/Air mixtures ( Low ~ , High ~ 1 - 1 /5 open )
• Bearing 6902ZZ (engine inside)
• Bearing R6Z NTN (engine front)

BEARING

• One way bearing (HF1216) 用 serpent one-way lube or 汽車計油 比較好 (KWS)
• Main Shaft bearing (NSK 6800ZZ) (KLN Bearing) X 2
• Main Shaft bearing (689ZZ) X 1
• Feathering Shaft bearing (MR148ZZ) X 4
• Feathering Shaft Trust bearing (F6-14G) X2

Clutch bearing Block

• NSK 6800ZZ X 1
• 695ZZ X 2

• My 600 first flight

25 05 2008 TKO HKO