Align Trex 500 ESP

Align Trex 500 ESP
CCPM Servo -- Align DS510
Tail Servo ---- Futaba 9257
Gyro --------- PG800
Motor -------- Scropion HK3026 1600Kv 13T Pinion
ESC ---------- Align 60A @ 6V 1 2 2 2 3 3
Rx ----------- Futaba 608Futaba

12FGH setup for Trex 500
Model Type -- Helipcoter
Swash -------- HR3
Swash Mixing
Ail --- -50%
Ele --- +57%
Pitch - +55%
--- Cyclic Pitch +/- 9 degree
--- Collectice Pitch + / - 13 degree
Servo Reverse & Channel & End Point
1. Aileron ------------- ( REV ) ( 100 ,100 )
2. Elevator ------------ ( REV ) ( 100, 100 )
3. Pitch --------------- ( NORM ) ( 100, 100 )
4. Rubber ------------- ( REV ) ( Left 100, right 100 )
5. Gyro --------------- ( Norm ) ( 100,100 )
6. Throttle ------------ ( REV ) ( High 100, Low 100 )
Gyro Gain Rate 1
ACT/INH - On ~~~~~~~~~Rate - 65%
TYPE ---- Norm ~~~~~~~~FINE TUNNING
SW ------- SB ~~~~~~~~~~CONTROL - LD
GROUP -- GRP ~~~~~~~~~RATE - 5%
Type Norm : (N%-50)X2 = GY/AVGS
Type GY/AVGS : N% / 2 + 50 = NormAlign Trex 500 ESP
編輯中.........