Flybarless Tarot 450 Pro

Spec

Ccpm : Hitec 5065MG
Tail : Align 520
Flybarless : Beast X
Esc : Hobbywing 40a bec 6V
Motor : Scropion 3595kv @ 12T
(BS MR694ZZ , MR84ZZ)
Rx : Futaba 6106HFC

Microbeast

SETUPMENU

• A. flybarless BLUE
• B. horizontal BLUE
• C. 200Hz = HS5065MG BLUE
• D. 1520us = Align 520 BLUE
• E. 333Hz = Align 520 BLUE
• F. Tail rotor limits
• G.
• H. Swashplate servo sub trim
• I. Swashplate mixing RED (flashes 2)
• J. Adjusting the cyclic control loop (cyclic pitch)
• K. Adjusting the collective pitch range
• L. Adjusting the swashplate limit ( swashplate ring )
• M. Checking the sensor directions inv. inv. ( ail & ele )
• N. Adjusting the piro optimization ( reversed )

PARAMETERMENU

• A. swashplate fine trimming
• B. control behavior ( expo ) radio
• C. swashplate -pitchhing up behaviour medium
• D. tail - heading lock-gain medium

1. Swashplate gain ( Dial 1 ) Turn dial 1 clockwise to increase the swashplate gain.
2. Swashplate direct gain ( Dial 2 ) Turn dial 2 clockwise to increase the swashplate gain for the cyclic functions.
3. Tail dynamic ( Dial 3 ) Turn dial 3 clockwise to increase Tail dynamic.
4. Tail gyro gain ( adjusted by TX )
   
   編輯中...