YGE Gov Store . setup

Gov Store . setup
1. thr stick range cal.
Turn on the transmitter, and put the throttle on stop. Select
the stop LED on the ProgCard II and push the Enter
button. Do the same with the full power position and the
Full Speed LED.
activate gov store
set gov >> gov off >> 斷電 >> gov store

setting of the throttle curve should be around
60 to 80% of the full throttle range
1. thr stick range cal.
2. freewheel on , Gov.Store
3. thr 100%
The learning can even be done with nearly or exactly 100%.
Doing this will improve the correspondence of the throttle curve
to the actual head speed. But please be careful as this 100%
could lead to very high head speeds, and anyway don’t forget
to set back the throttle curve to avoid flying with full power.
(voltage ?)