YGE Gov Store . setup

Gov Store . setup
1. thr stick range cal.
Turn on the transmitter, and put the throttle on stop. Select
the stop LED on the ProgCard II and push the Enter
button. Do the same with the full power position and the
Full Speed LED.
activate gov store
set gov >> gov off >> 斷電 >> gov store

setting of the throttle curve should be around
60 to 80% of the full throttle range
1. thr stick range cal.
2. freewheel on , Gov.Store
3. thr 100%
The learning can even be done with nearly or exactly 100%.
Doing this will improve the correspondence of the throttle curve
to the actual head speed. But please be careful as this 100%
could lead to very high head speeds, and anyway don’t forget
to set back the throttle curve to avoid flying with full power.
(voltage ?)

Trex 450 pro UPDATE 31072012

Spec Bird 1
CCPM : ServoKing DS995
Tail : Futaba Bls257
Esc : YGE40a with senor
Motor : Align 450MX 1700kv 12T 121T
FBL system : miniVbar 5.3 Pro
Battery : Hyperion 6S1100Mah 195g
Rx : Futaba 6203sb
Rotor head : main blade holder ( by Iceman33 )
                        4mm Feathering Shaft ( by Iceman33 )
                        Main Rotor Housing ( by Tarot 45117-A )
                        Pros and cons of threaded rod  (Tarot 450  TL2639)
AUW : 900g
Vbar setup :
Esc setup : vbar GOV ( 2500, 3000 , 3250 )

Spec Bird 2
CCPM : ServoKing DS995
Tail : Futaba s9257
Esc : Hobbywing 40a
Motor : Tarot 1860kv 11T 150T
FBL system : miniVbar 5.3 Pro
Battery : Hyperion 6S1100Mah 195g
Rx : Futaba 6203sb
Rotor head : main blade holder ( by Iceman33 )
4mm Feathering Shaft ( by Iceman33 )
Main Rotor Housing ( by Tarot 45117-A )
Pros and cons of threaded rod (Tarot 450 TL2639)
AUW : 875g
Vbar setup :
Esc setup : Throttle curve