CGY750 SETUP for Align 450Pro

CGY750 SETUP for Align 450Pro
1. Select Servo type ( ALI .ELE, RUB, THR(gov) )
2. S.Bus connection setting

1. Rubber Gyro basic
2. Servo type DG:1520 (for Hitec 5065MG)
3. Gyro direction ( Reverse )
4. servo limit A&B = ( 95% )
5. Flight mode 3D = ( 720deg/sec & expo -20% )

1. Rubber Gyro Expert
2. Rubber servo neutral setting - defaulf :0 uS
3. Gyro basic gain - defaulf :100%
4. Rubber expo. - default -20% (3D-AVCS)
5. Rubber delay mode - default : Function
6. Control delay in - default : 3D = 15
7. Control delay out - default : 3D = 12
8. Stop delay - default : 120% ( 100% - 400% )
9 . Gyro working mode - default : CMT
10. Pirouette speed - default : 720deg/sec ( 3D )
11. Gain change up delay - default: 12
12. Gain change down delay - default: 3
13. Rubber histeresis - default: 7uS
14. Gain tracking - default: 0%
15. F/F mixing - default: off
16. F/F mixing rate - default: 0%
17. F/F mixing acceleration gain - default: 0%
18. Sensor mode - default: Moderate
19. Neutral compensation - default: ON
20. Yaw smoother - default: ON
21. Stop Boosting - default: OFF
22. Gyro date reset

Rubber gyro adjustment
Increase the gain on RUB gyro gain until you notice
a OSCILLATION, than decrease the gain slightly.